B2B GST Credit Available
- Stock: 141 in Stock
- SKU: 07556
- Delivery Time
- Bulk & B2B RFQ
KP CR2032 3.0V 25H Lithium Coin Cell Battery with 2-Pin JST 1.25mm Connector
The KP CR2032 3.0V 25H Lithium Coin Cell Battery with 2-Pin JST 1.25mm Connector is a compact, reliable power solution designed for low-power electronic devices and embedded systems. Based on a high-quality CR2032 lithium coin cell, this battery delivers a stable 3.0V output and long shelf life, making it ideal for real-time clocks, memory backup, wireless sensors, remote controls, wearable devices, and portable IoT projects. The pre-attached 2-pin JST 1.25mm connector allows quick, solder-free integration with compatible development boards and modules, ensuring clean and secure power connections.
Encased for durability and easy handling, this battery pack is especially suitable for applications where space is limited but dependable backup power is essential. With low self-discharge and consistent performance, it provides long-lasting operation for standby and intermittent-use electronics.
Features
- High-quality CR2032 lithium coin cell with stable 3.0V output
- Pre-wired 2-Pin JST 1.25mm (MX1.25) connector for plug-and-play us
- Compact, lightweight, and space-saving design
- Ideal for RTC backup, CMOS memory, sensors, and low-power modules
- No soldering required quick and secure connection
- Low self-discharge for long standby life
- Maintenance-free and easy replacement
- Suitable for embedded, IoT, wearable, and portable electronics
Specifications
- Model: KP CR2032 3.0V 25H
- Battery Type: Lithium Coin Cell
- Nominal Voltage: 3.0V
- Rated Capacity: ~220–240 mAh (typical for CR2032)
- Energy Rating: 25H
- Connector Type: 2-Pin JST 1.25mm (MX1.25)
- Operating Temperature: -20°C to 60°C
- Shelf Life: Up to 5 years approx
- Applications: Microcontrollers, IoT devices, wearable electronics, backup memory, small gadgets
Warranty Terms :
Branded products (Waveshare/ Raspberry Pi/ Radxa/ DWIN etc) are as per brand warranty terms. Generic products are eligible for replacement within 7 days of delivery based on following conditions.
Products are eligible for a replacement if there is physical damage during transit or a clear manufacturing defect. Any claim for damage/ wrong items/ replacement must be made within 48 hours of successful delivery of the product. Requests for refund of amount or exchange of product(s) will be reviewed on a case by case basis and HUBTRONICS carries final rights to take a final decision on refund, store credit or exchange.
What to take care of ?
Most of our products are technical in nature and require trained personnel to handle them. Any kind of mishandling can result in damage or malfunctioning of the product, it is not possible for us to provide a replacement or refund if the product is damaged due to technical or physical mishandling.
Who pays the return shipping cost?
Free of cost return pickup from delivery address is eligible for products categorized as manufacturing defect/ Damage in transit/ Wrong items delivered. We do not support return pickup for any B2B order or offline orders not placed on website. Buyer need to arrange return shipping for B2B orders.
What voids warranty?
Please note that replacement/ return or refund is not possible if the product is not compatible with your system/application. Please check all the technical details/ dimensions etc. before ordering and contact us for any kind of clarifications.
If product is soldered/ programmed at any point or physically altered in any way, it is not eligible for return/ replacement. If the item requires soldering for testing, please ensure that you use suitable clips or jig to test it without soldering. Any kind of soldering job makes the product ineligible for return or replacement.
Following items are not eligible for return under any circumstances
- Device Programmers / Dongles
- Soldering Consumables (Wire, Flux etc)
